MAX22513 Surge-Protected Dual Driver IO-Link Devic

By Maxim Integrated 86

MAX22513 Surge-Protected Dual Driver IO-Link Devic

Maxim's MAX22513 dual-channel low-power IO-Link device transceiver features a selectable control interface, internal high-efficiency DC-DC buck regulator, two internal linear regulators, and integrated surge protection for robust communication. The device features low-on-resistance drivers (C/Q and DO/DI), selectable driver current limits, and overcurrent protection to reduce power dissipation in small sensor applications.

The DC-DC buck regulator supplies up to 300 mA of load current and has an adjustable output voltage from 2.5 V to 12 V. Internal linear regulators generate 5 V and 3.3 V, supplying up to 50 mA of current.

The MAX22513 can be controlled using SPI or I²C interfaces, providing flexibility for microcontrollers and extensive control and diagnostic features. Both full- and half-duplex SPI are supported. The internal MCLK oscillator provides a clock source to a microcontroller for IO-Link communication.

The MAX22513 features extensive integrated protection to ensure robust communication in harsh industrial environments. All four IO pins (V24, C/Q, DO/DI, and GND), are reverse voltage protected, short circuit protected, and feature integrated ±1 kV/500 Ω surge protection.

The MAX22513 is available in a tiny WLP package (4.1 mm x 2.1 mm) or 28-pin TQFN-EP package (3.5 mm x 5.5 mm) and operates over a -40°C to +125°C temperature range.

Design Solutions Interface IO-Link Revolution

Features
  • High configurability and integration reduces SKU
    • Configurable C/Q and DO/DI drivers
      • PNP, NPN, and push-pull modes
      • Individual slew rate control for drivers
      • Selectable driver current limit: 50 mA to 250 mA
    • Control and monitoring with I²C or SPI
      • Half- and full-duplex SPI modes
    • Integrated high-efficiency DC-DC buck regulator
      • Selectable switching frequency
      • 921 kHz (typ.) or 1.229 MHz (typ.)
      • 300 mA (max) load
      • Output voltage from 2.5 V to 12 V
    • Internal 5 V and 3.3 V linear regulators
    • Accurate oscillator for IO-Link communication
  • Integrated protection enables robust systems
    • Integrated ±1 kV/500 Ω surge protection
    • Glitch filters for improved burst resilience
    • Selectable overcurrent configuration
    • Hot-plug and reverse polarity protection
    • Operating temperature range: -40°C to +125°C
  • Optimized for small sensor designs
    • Low power dissipation:
      • 2 Ω (typ.) on-resistance for C/Q and DO/DI drivers
    • Available in two tiny packages:
      • 28-pin TQFN-EP (3.5 mm x 5.5 mm)
      • WLP (4.1 mm x 2.1 mm)
Applications
  • Industrial sensors
  • IO-Link sensor and actuator devices

类别

Top