AD600JR-REEL7

AD600JR-REEL7
Mfr. #:
AD600JR-REEL7
制造商:
Analog Devices Inc.
描述:
Special Purpose Amplifiers DUAL VARIABLE GAIN AMP IC
生命周期:
制造商新产品。
数据表:
AD600JR-REEL7 数据表
交货:
DHL FedEx Ups TNT EMS
支付:
T/T Paypal Visa MoneyGram Western Union
HTML Datasheet:
AD600JR-REEL7 DatasheetAD600JR-REEL7 Datasheet (P4-P6)AD600JR-REEL7 Datasheet (P7-P9)AD600JR-REEL7 Datasheet (P10-P12)AD600JR-REEL7 Datasheet (P13-P15)AD600JR-REEL7 Datasheet (P16-P18)AD600JR-REEL7 Datasheet (P19-P21)AD600JR-REEL7 Datasheet (P22-P24)AD600JR-REEL7 Datasheet (P25-P27)AD600JR-REEL7 Datasheet (P28-P30)AD600JR-REEL7 Datasheet (P31-P32)
ECAD Model:
更多信息:
AD600JR-REEL7 更多信息 AD600JR-REEL7 Product Details
产品属性
属性值
制造商:
模拟设备公司
产品分类:
专用放大器
RoHS:
N
系列:
AD600
放大器类型:
可变增益放大器
通道数:
2 Channel
英镑 - 增益带宽产品:
35 MHz
Ib - 输入偏置电流:
1 uA
电源电压 - 最大值:
5.25 V
电源电压 - 最小值:
- 4.75 V
工作电源电流:
14 mA
最低工作温度:
0 C
最高工作温度:
+ 70 C
安装方式:
贴片/贴片
包装/案例:
SOIC-16
打包:
卷轴
高度:
2.35 mm
长度:
10.5 mm
供应类型:
双重的
宽度:
7.6 mm
品牌:
模拟设备公司
双电源电压:
+/- 5 V
最大双电源电压:
+/- 5.25 V
最大输入电阻:
102 Ohms at +/- 5 V
最小双电源电压:
+/- 4.75 V
工作电源电压:
5 V
产品类别:
专用放大器
出厂包装数量:
400
子类别:
放大器 IC
电压增益分贝:
41.07 dB
单位重量:
0.023492 oz
Tags
AD600JR, AD600J, AD600, AD60, AD6
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
***i-Key
IC OPAMP VGA 35MHZ 16SOIC
***i-Key Marketplace
IC VARIABLE GAIN 2 CIRC 16SOIC
***log Devices
The AD600/AD602 dual channel, low noise, variable gain amplifiers are optimized for use in ultrasound imaging systems, but are applicable to any application requiring precise gain, low noise and distortion, and wide bandwidth. Each independent channel provides a gain of 0 dB to +40 dB in the AD600 and -10 dB to +30 dB in the AD602. The lower gain of the AD602 results in an improved signal-to-noise ratio (SNR) at the output. However, both products have the same 1.4 nV/√Hz input noise spectral density. The decibel gain is directly proportional to the control voltage, accurately calibrated, and supply and temperature-stable. To achieve the difficult performance objectives, a proprietary circuit form, the X-AMP®, was developed. Each channel of the X-AMP comprises a variable attenuator of 0 dB to -42.14 dB followed by a high speed fixed gain amplifier. In this way, the amplifier never has to cope with large inputs, and can benefit from the use of negative feedback to precisely define the gain and dynamics. The attenuator is realized as a 7-stage R-2R ladder network having an input resistance of 100 W, laser trimmed to ±2%. The attenuation between tap points is 6.02 dB; the gain-control circuit provides continuous interpolation between these taps. The resulting control function is linear in dB. The gain-control interfaces are fully differential, providing an input resistance of ~15 M W and a scale factor of 32 dB/V (that is, 31.25 mV/dB) defined by an internal voltage reference. The response time of this interface is less than 1 µs. Each channel also has an independent gating facility that optionally blocks signal transmission and sets the dc output level to within a few millivolts of the output ground. The gating control input is TTL- and CMOS-compatible. The maximum gain of the AD600 is 41.07 dB, and the maximum gain of the AD602 is 31.07 dB; the -3 dB bandwidth of both models is nominally 35 MHz, essentially independent of the gain. The SNR for a 1 V rms output and a 1 MHz noise bandwidth is typically 76 dB for the AD600 and 86 dB for the AD602. The amplitude response is flat within ±0.5 dB from 100 kHz to 10 MHz; over this frequency range, the group delay varies by less than ±2 ns at all gain settings. Each amplifier channel can drive 100 W load impedances with low distortion. For example, the peak specified output is ±2.5 V minimum into a 500 W load, or ±1 V into a 100 W load. For a 200 W load in shunt with 5 pF, the total harmonic distortion for a ±1 V sinusoidal output at 10 MHz is typically -60 dBc. The AD600J/AD602J are specified for operation from 0°C to 70°C and are available in 16-lead PDIP (N) and 16-lead SOIC packages. The AD600A/AD602A are specified for operation from -40°C to +85°C and are available in 16-lead CERDIP (Q) and 16-lead SOIC packages. The AD600S/AD602S are specified for operation from -55°C to +125°C, are available in a 16-lead CERDIP (Q) package, and are MIL-STD-883 compliant. The AD600S/AD602S are also available under DESC SMD 5962-94572. AD600 - Gain Range: 0 dB to 40 dB AD602 - Gain Range: -10 dB to + 30 dB
型号 制造商 描述 库存 价格
AD600JR-REEL7
DISTI # AD600JR-REEL7TR-ND
Analog Devices IncIC OPAMP VGA 35MHZ 16SOIC
RoHS: Not compliant
Min Qty: 400
Container: Tape & Reel (TR)
Limited Supply - Call
    AD600JR-REEL7
    DISTI # 584-AD600JR-R7
    Analog Devices IncSpecial Purpose Amplifiers DUAL VARIABLE GAIN AMP IC
    RoHS: Not compliant
    0
      AD600JR-REEL7Analog Devices IncAnalog Circuit, 1 Func, CMOS, PDSO16
      RoHS: Not Compliant
      750
      • 1000:$21.8300
      • 500:$22.9800
      • 100:$23.9200
      • 25:$24.9500
      • 1:$26.8700
      图片 型号 描述
      AD600JRZ

      Mfr.#: AD600JRZ

      OMO.#: OMO-AD600JRZ

      Special Purpose Amplifiers DUAL VARIABLE GAIN AMP IC
      AD600JNZ

      Mfr.#: AD600JNZ

      OMO.#: OMO-AD600JNZ

      Special Purpose Amplifiers DUAL VARIABLE GAIN AMP IC
      AD600JRZ-RL

      Mfr.#: AD600JRZ-RL

      OMO.#: OMO-AD600JRZ-RL

      Special Purpose Amplifiers DUAL VARIABLE GAIN AMP IC
      AD600JR-REEL7

      Mfr.#: AD600JR-REEL7

      OMO.#: OMO-AD600JR-REEL7-ANALOG-DEVICES-INC-ADI

      Differential Amplifiers DUAL VARIABLE GAIN AMP IC
      AD600JRZ-R7

      Mfr.#: AD600JRZ-R7

      OMO.#: OMO-AD600JRZ-R7-ANALOG-DEVICES-INC-ADI

      Differential Amplifiers DUAL VARIABLE GAIN AMP IC
      AD600JN

      Mfr.#: AD600JN

      OMO.#: OMO-AD600JN-ANALOG-DEVICES

      IC OPAMP VGA 35MHZ 16DIP
      AD600JR-REEL

      Mfr.#: AD600JR-REEL

      OMO.#: OMO-AD600JR-REEL-ANALOG-DEVICES

      IC OPAMP VGA 35MHZ 16SOIC
      AD600JR/AR

      Mfr.#: AD600JR/AR

      OMO.#: OMO-AD600JR-AR-1190

      全新原装
      AD600JRX

      Mfr.#: AD600JRX

      OMO.#: OMO-AD600JRX-1190

      全新原装
      AD600JRX-AMP

      Mfr.#: AD600JRX-AMP

      OMO.#: OMO-AD600JRX-AMP-1190

      全新原装
      可用性
      库存:
      Available
      订购:
      5500
      输入数量:
      AD600JR-REEL7的当前价格仅供参考,如果您想获得最优惠的价格,请提交查询或直接发送电子邮件至我们的销售团队[email protected]
      从...开始
      最新产品
      • PF1206/2512 Low Ohmic Current Sensing Resistors
        Yageo highlights their low ohmic current sensing resistors, which are applicable for battery chargers, power supplies, and more.
      • Kintex® UltraScale™
        Xilinx's Kintex UltraScale devices provide the best price, performance, and wattage at 20 nm and include the highest signal processing bandwidth in a midrange device, next-generation transceiv
      • Compare AD600JR-REEL7
        AD600JR vs AD600JRREEL vs AD600JRREEL7
      • CL Series Inrush Current Limiters
        Amphenol's CL series NTC inrush current limiters reduce large inrush currents in switching power supplies, fluorescent lamps, inverters, and motors.
      • TE Connectivity ALCOSWITCH Switches
        TE Connectivity ALCOSWITCH provides a variety of switches from miniature printed circuit board mounted DIP switches to rugged oil-tight switches for industrial controls.
      • UHMW Polyethylene Tape
        3M™ UHMW polyethylene tapes are film coated with a rubber adhesive which provides an excellent abrasion resistant surface.
      Top