OMO ElectronicOMO Electronic
Expand menu
您好，登录我的帐户
0 购物车

ADUCM310BBCZ-RL

ADUCM310BBCZ-RL
Mfr. #:
ADUCM310BBCZ-RL
制造商:
Analog Devices Inc.
描述:
ARM Microcontrollers - MCU 80Mhz M3 wi 14Bit Analog for TSFP+ (Fin)
生命周期:
制造商新产品。
数据表:
ADUCM310BBCZ-RL 数据表
交货:
DHL FedEx Ups TNT EMS
支付:
T/T Paypal Visa MoneyGram Western Union
HTML Datasheet:
ADUCM310BBCZ-RL DatasheetADUCM310BBCZ-RL Datasheet (P4-P6)ADUCM310BBCZ-RL Datasheet (P7-P9)ADUCM310BBCZ-RL Datasheet (P10-P12)ADUCM310BBCZ-RL Datasheet (P13-P15)ADUCM310BBCZ-RL Datasheet (P16-P18)ADUCM310BBCZ-RL Datasheet (P19-P21)ADUCM310BBCZ-RL Datasheet (P22-P24)ADUCM310BBCZ-RL Datasheet (P25-P27)ADUCM310BBCZ-RL Datasheet (P28)
ECAD Model:
更多信息:
ADUCM310BBCZ-RL 更多信息 ADUCM310BBCZ-RL Product Details
产品属性
属性值
制造商：
模拟设备公司
产品分类：
ARM 微控制器 - MCU
RoHS：
Y
安装方式：
贴片/贴片
包装/案例：
BGA-112
系列：
ADUCM310
核：
ARM Cortex M3
数据总线宽度：
32 bit
最大时钟频率：
80 MHz
程序内存大小：
256 kB
数据内存大小：
32 kB
ADC分辨率：
14 bit
工作电源电压：
3.3 V
最低工作温度：
- 10 C
最高工作温度：
+ 85 C
打包：
卷轴
产品：
单片机
程序存储器类型：
闪光
品牌：
模拟设备公司
数据内存类型：
静态随机存取存储器
接口类型：
I2C, SPI, UART
模拟电源电压：
3.6 V
DAC分辨率：
12 bit
输入/输出电压：
3.3 V
ADC 通道数：
22 Channel
定时器/计数器的数量：
3 Timer
处理器系列：
ADUCM310
产品类别：
ARM 微控制器 - MCU
出厂包装数量：
2500
子类别：
微控制器 - MCU
电源电压 - 最大值：
3.6 V
电源电压 - 最小值：
2.9 V
看门狗定时器：
看门狗定时器
Tags
ADUCM31, ADUCM3, ADUCM, ADUC, ADU
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
***et Europe
MCU 32-Bit ADuCM31x ARM Cortex M3 RISC 256KB Flash 2.5V/3.3V 112-Pin CSP-BGA T/R
***i-Key
IC MCU 32B 256KB FLASH 112CSPBGA
***ark
80Mhz M3 wi 14Bit Analog Ror TSRP+ (Rin), REEL
***log Devices
The ADuCM310 is a multidie stack, on-chip system designed for diagnostic control of tunable laser optical module applications. The ADuCM310 features a 16-bit (14-bit accurate) multichannel successive approximation register (SAR) ADC, an ARM Cortex™-M3 processor, eight voltage DACs (VDACs), six current output DACs, and Flash/EE memory packaged in a 6 mm × 6 mm, 112-ball CSP_BGA package. The bottom die in the stack supports the bulk of the low voltage analog circuitry and is the largest of the three die. It contains the ADC, VDACs, main IDAC circuits, as well as other analog support circuits, such as the low drift precision 2.5 V voltage reference source. The middle die in the stack supports the bulk of the digital circuitry, including the ARM Cortex-M3 processor, the flash and SRAM blocks, and all of the digital communication peripherals. In addition, this die provides the clock sources for the whole chip. A 16 MHz internal oscillator is the source of the internal PLL that outputs an 80 MHz system clock. The top die, which is the smallest die, was developed on a high voltage process, and this die supports the −5 V and +5 V VDAC outputs. It also implements the SOA IDAC current sink circuit that allows the external SOA diode to pull to a −3.0 V level to implement the fast shutdown of the laser output. Regarding the individual blocks, the ADC is capable of operating at conversion rates up to 800 kSPS. There are 10 external inputs to the ADC, which can be single ended or differential. Several internal channels are included, such as the supply monitor channels, an on-chip temperature sensor, and internal voltage reference monitors. The VDACs are 12-bit string DACs with output buffers capable of sourcing between 10 mA and 50 mA, and these DACs are all capable of driving 10 nF capacitive loads. The low drift current DACs have 14-bit resolution and varied full-scale output ranges from 0 mA to 20 mA to 0 mA to 250 mA on the SOA IDAC (IDAC3). The SOA IDAC also comes with a 0 mA to −80 mA current sink capability. A precision 2.5 V on-chip reference source is available. The internal ADC, IDACs, and VDAC circuits use this on-chip reference source to ensure low drift performance for all of these peripherals. The ADuCM310 also provides 2× buffered reference outputs capable of sourcing up to 1.2 mA. These outputs can be used externally to the chip. The ADuCM310 integrates an 80 MHz ARM Cortex-M3 processor. It is a 32-bit reduced instruction set computer (RISC) machine, offering up to 100 DMIPS peak performance. The ARM Cortex-M3 processor also has a flexible 14-channel direct memory access (DMA) controller supporting serial peripheral interface (SPI), UART, and I2C communication peripherals. The ADuCM310 has 256 kB of nonvolatile Flash/EE memory and 32 kB of SRAM integrated on-chip. A 16 MHz on-chip oscillator generates the 80 MHz system clock. This clock internally divides to allow the processor to operate at lower frequency, thus saving power. A low power internal 32 kHz oscillator is available and can clock the timers. The ADuCM310 includes three general-purpose timers, a wake-up timer (which can be used as a general-purpose timer), and a system watchdog timer. A range of communication peripherals can be configured as required in a specific application. These peripherals include UART, 2 × I2C, 2 × SPI, GPIO ports, and pulse-width modulation (PWM). On-chip factory firmware supports in-circuit serial download via the UART, while nonintrusive emulation and program download are supported via the serial wire debug port (SW-DP) interface. These features are supported on the EVAL-ADuCM310QSPZ development system. The ADuCM310 operates from 2.9 V to 3.6 V and is specified over a temperature range of −40°C to +85°C. Note that, throughout this data sheet, multifunction pins, such as P1.0/SIN/ECLKIN/PLAI[4], are referred to either by the entire pin name or by a single function of the pin, for example, P1.0, when only that function is relevant. For additional information on the ADuCM310, see the ADuCM310 reference manual, How to Set Up and Use the ADuCM310. APPLICATIONS Optical modules—tunable laser modules
Microcontrollers
Analog Devices Microcontroller Units (MCUs) can be used in a multitude of Internet of Things (IoT) processing applications. With built-in ADCs, DACs, and temperature sensors, the microcontrollers provide the analog and digital sensing functions that support interpreting capabilities in precision-sensing applications. Some of these MCUs can be powered by a single coin-cell battery with on-board power management, along with embedded memory and security features to help protect IP. These microcontrollers can be used in industrial, automotive, and instrumentation applications, as well as IoT applications such as Smart Agriculture, Smart Building, Smart City, Smart Factory, and Smart Health.
ADuCM310 Precision Analog MCUs
Analog Devices ADuCM310 Precision Analog Microcontrollers feature a 16-bit (14-bit accurate) multichannel successive approximation register (SAR) analog-to-digital converter (ADC), an ARM Cortex™-M3 processor, 8 voltage digital-to-analog converters (DACs), 6 current output DACs, and Flash/EE memory enclosed in a 6mm × 6mm, 112-ball CSP_BGA package. The ADC can operate at conversion rates up to 800kSPS. The device includes several internal channels, such as the supply monitor channels, an on-chip temperature sensor, and internal voltage reference monitors. The VDACs, which are 12-bit string DACs with output buffers capable of sourcing between 10mA and 50mA, are all capable of driving 10nF capacitive loads. The ADC, IDACs, and VDAC circuits use a precision 2.5V on-chip reference source to ensure low drift performance for all of the peripherals. The integrated 80MHz ARM Cortex-M3 processor has a 32-bit reduced instruction set computer (RISC) machine, providing up to 100DMIPS peak performance. The ARM Cortex-M3 processor also has a flexible 14-channel direct memory access (DMA) controller supporting serial peripheral interface (SPI), UART, and I²C communication peripherals. In addition, the ADuCM310 offers 256kB of nonvolatile Flash/EE memory and 32kB of SRAM integrated on-chip. The ADuCM310 precision analog microcontrollers are ideal for precision instrumentation, smart sensors, data acquisition systems, base station systems, transient capture systems, DAS & communications systems, wearable health monitoring devices, and optical networking.Learn More
Processors & DSP ADI SLP
型号 制造商 描述 库存 价格
ADUCM310BBCZ-RL
DISTI # ADUCM310BBCZ-RL-ND		Analog Devices IncIC MCU 32BIT 256KB FLASH 112BGA
RoHS: Compliant
Min Qty: 2500
Container: Tape & Reel (TR)		Temporarily Out of Stock
  • 2500:$40.0119
ADUCM310BBCZ
DISTI # 584-ADUCM310BBCZ		Analog Devices IncARM Microcontrollers - MCU 80Mhz M3 wi 14Bit Analog for TSFP+ (Fin)
RoHS: Compliant		6
  • 1:$52.0500
  • 5:$50.4200
  • 10:$49.4500
  • 25:$47.2500
  • 50:$44.4700
  • 100:$43.1100
ADUCM310BBCZ-RL
DISTI # 584-ADUCM310BBCZ-RL		Analog Devices IncARM Microcontrollers - MCU 80Mhz M3 wi 14Bit Analog for TSFP+ (Fin)
RoHS: Compliant		0
  • 2500:$39.8400
ADUCM310BBCZ-RL
DISTI # ADUCM310BBCZ-RL		Analog Devices IncDIGITAL ISOLATOR
RoHS: Compliant		0
  • 2500:$42.5400
图片 型号 描述
ADUCM310BBCZ

Mfr.#: ADUCM310BBCZ

OMO.#: OMO-ADUCM310BBCZ

 ARM Microcontrollers - MCU 80Mhz M3 wi 14Bit Analog for TSFP+ (Fin)
ADUCM310BBCZ-RL

Mfr.#: ADUCM310BBCZ-RL

OMO.#: OMO-ADUCM310BBCZ-RL

 ARM Microcontrollers - MCU 80Mhz M3 wi 14Bit Analog for TSFP+ (Fin)
ADUCM310BBCZ

Mfr.#: ADUCM310BBCZ

OMO.#: OMO-ADUCM310BBCZ-ANALOG-DEVICES

 IC MCU 32BIT 256KB FLASH 112BGA ADuCM
ADUCM310BBCZ-RL

Mfr.#: ADUCM310BBCZ-RL

OMO.#: OMO-ADUCM310BBCZ-RL-ANALOG-DEVICES

 IC MCU 32BIT 256KB FLASH 112BGA ADuCM
ADUCM310BBCZADI

Mfr.#: ADUCM310BBCZADI

OMO.#: OMO-ADUCM310BBCZADI-1190

 全新原装
可用性
库存:
Available
订购:
1000
输入数量:
ADUCM310BBCZ-RL的当前价格仅供参考，如果您想获得最优惠的价格，请提交查询或直接发送电子邮件至我们的销售团队[email protected]
从...开始
最新产品
More Newest Products
Top