TI's bq25071 accepts power from USB ports or AC adapters to charge single cell LiFePO4 batteries in handheld devices.
By Texas Instruments 891
Digi International's full-featured control and communications solution providing microprocessor control and I/O for industrial applications.
By Digi International 1379
Texas Instruments' TPS92075 is a hybrid power factor controller (PFC) with a built-in phase-dimming decoder. The device analyzes line cycles continuously.
By Texas Instruments 825
Vishay Semiconductor Opto Division's optocouplers design to increase reliability in high-voltage applications such as alternative energy and industrial systems.
By Vishay Semiconductor / Opto Division 1334
Texas Instruments' PCM5122/42 devices are a family of monolithic CMOS integrated circuits that include a stereo DAC and support circuitry in a TSSOP package.
By Texas Instruments 982
Texas Instruments' DRV8846 provides a highly-integrated stepper motor driver for cameras, printers, projectors, and other automated equipment applications.
By Texas Instruments 895
Texas Instruments' OPA1612 bipolar-input operational amplifier achieves very low 1.1nV/√Hz noise density with an ultra-low distortion of 0.000015% at 1kHz.
By Texas Instruments 778
The Texas Instruments' THS4541 is a low-power, voltage-feedback, FDA with an input common-mode range below the negative rail, and rail-to-rail output.
By Texas Instruments 863
Texas Instruments' TPS40425 is a PMBus, synchronous buck, driverless controller. The device operates in non-smart power mode in factory default setting.
By Texas Instruments 642
Texas Instruments' TPS6218x 4-15V, 6A, ultra-small, 2 identical current balanced phases, step-down DC-DC converters with AEE™ for low-profile power rails.
By Texas Instruments 951
Texas Instruments' TPD1S514 single-chip protection solution for the USB VBUS line or other power buses has bidirectional nFET switch ensures safe current flow.
By Texas Instruments 665
Texas Instruments' TPA6120A2 very high fidelity headphone amplifier replaces a costly discrete design and allows music, not the amplifier, to be heard.
By Texas Instruments 1124
DRV2605 haptic driver provides flexible haptic control of ERM and LRA actuators, eventually saving timer interrupts and hardware pins.
By Texas Instruments 995
Texas Instruments' TLV3691 offers a wide supply range, low quiescent current, and rail-to-rail inputs.
By Texas Instruments 959
Maxim's MAX11300 integrates a PIXI™ 12-bit multichannel ADC and a 12-bit multichannel buffered DAC in a single IC.
By Maxim Integrated 953
AD7091R-2/AD7091R-4/AD7091R-8 multichannel 12-bit, ultra-low power, successive approximation analog-to-converter family from Analog Devices.
By Analog Devices Inc 871
The Analog Devices ADA4870 is a unity-gain stable, high-speed current feedback amplifier capable of delivering 1 A of output current and 2500 V/μs slew rate from a 40 V supply.
By Analog Devices Inc 1002
The Analog Devices ADM7170 is a CMOS, low-dropout linear regulator (LDO) that operates from 2.3 V to 6.5 V and provides up to 500 mA of output current.
By Analog Devices Inc 864
The AD7175-2 is a low noise, fast settling, multiplexed, 2-/4-channel Σ-Δ ADC for low bandwidth inputs.
By Analog Devices Inc 912
STMicro’s STPM33 single-phase metering ICs are designed to instantaneously produce highly accurate power and energy measurements from voltage and current wave forms.
By STMicroelectronics 1256